14 MIND-BLOWING TOOL HACKS

5-Minute CraftsDIYDo it yourselfcraftsuseful thingslifehackstrickstipsDIY projectsDIY activitiesHandcraftTutorialtoolhammerbinderbinder clipsrubber banddrillhousholdrepairrepair hackspaper knifehang a picturenailboltcablesmixer

Subscribe to 5-Minute Crafts here: https://www.goo.gl/8JVmuC 

Facebook: https://www.facebook.com/5min.crafts/
Instagram: https://www.instagram.com/5.min.crafts/

Music:
1. Smooth Sailing (with Guitar) by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Artist: http://audionautix.com/ 

2. Whatdafunk by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Artist: http://audionautix.com/ 

3. Rhastafarian by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Artist: http://audionautix.com/ 

4. Right On Red by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Artist: http://audionautix.com/ 

5. Green Leaves by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Artist: http://audionautix.com/

Jesus Borrego
next time i get scared to hold the nail going into a hollow metal then wood underneath, i wont pre drill it. nor will i grab my pliers out my toolbox, i will hire johnny bravo and ask to use his comb😂 all this is common sense.
Tommyinannta
Macgiver
George Vreeland Hill
I have been watching videos about lock breaking, cutting wires, falsifying papers and more. Pretty soon, I will have a really nice car. Thanks.
David
hurrible mewsick
John Corson
Clothes pen .. is awsome
cc steamer
Good tips, thanx.
Pete Villareal
Thumbnail is 6:52 , it is a meat tenderizer.
Olivia Brown
https://youtu.be/l_p9JDNQjrU
Hani Hassan
printing money on yt
Anthony Ghantous
Ha ha I need. are you donki
atimmons31
If everyone started doing these things, that could put a lot of Chinese tool makers out of work & then Walmart would lose money. Keep up the good videos like these. Also, a couple of the things showed were what the tools were designed to do. The screwdriver with the hex shape below the handle & wrench was one ( at 1:35 - 1:45 ) & breaking the blade on the cutting tool to get a sharp edge. ( at 1:22 - 1:35 ) Noticed the scored metal on the blade every 1/2 inch or so, so it can be broken off easily to get a fresh cutting edge. I bet some people don't know that that is the reason the blade is made that way & throw it away when the first blade gets dull. So I guess it is alright to train people that don't know how to use something, but that is not a hack. And I thought he could have cored that apple after peeling it with the same tool, just hold the apple & drill out the middle.
Usman Usman Ali
Good
Maxwell Kellogg
if someone showed up to work on my house and used any one of these tricks i would fire them immediately no questions asked
Knives Castor
https://youtu.be/CuI1CBwFb3A
rey250887
Amazing, thanks for this!
Lee Williams
My electric can opener broke, so I got a manual hand operated knob type. Broke the knob off and applied a Tyrap to keep the spindle from falling out. Then I put it in the cordless drill. Opens cans in a flash!
Cheng Chan
You guys are very awesome!
Abdul Sahid
thank's bro
John Stanfill
5:43 doesnt work... just screws up your knife
kavita kori
Mind blowing ideas
Andrew Nahlik
On this autistic video
Ricardo García Vázquez
¡¡Excelente!!
Фарик Якубов
👍👍👍
Design Tribe
https://goo.gl/X3DJHc
svend erik Pedersen
H
James McLennan
Why would you bother taping a fork to a hammer when you can buy... I don’t know.. maybe a $3 meat tenderiser
Chuck Peck Tribe og Shabazz
Why are these hacks? any contractor like me has been doing this sh#t for years...
Abusadong Pulitiko
Next time use the Mcgyver intro, haha:-)
prabin Chaudhary
smart work wowwww..
Bima Chronicle
Wonderful .
John Smith
Have a good idea.
Yovanni Soto
RFii OP
Михаил Ковальчук
Гениальная простота.
Artful Gamers
3:25 manages to somehow ruin a wall by pulling out a nail..
Julio Cesar Andrew Benitez
pinches putitos, cada vez son mas inutiles, y necesitan que les digan como hacer las cosas,
MrRichlisa
Ladies and Gentlemen do not try this at home
Jot Morales
the cutter's end tip was really designed to break and replace the dull blade.i don't know why some people are ignorant..elementary students know that too...maybe not in your dumb country.
chrisrose97
SUPER!
zych faye
I dont have drill : (
Xin Xin
Aku nak main.
bolficek
Great!
Technical Misraji
Awesome
iTexxoR
And where is the mindblowing hack???
S endetta
German Du guckst einfach von anderen YouTubern ab und dann kriegst du mehr Likes und aufrufe als die anderen und Ich hab auf denn Datum geguckt und das von denn anderem ist es Elter also Arschloch 🖕🖕🖕
Shock
Oh, right now would be to plagiarize, I thought you were honest, unsolicited.
Kyle McCreary
If you rely want a mind blowing to hack all you need is
-blowdryer
-fake brain
-and a sense of humor
bran mcvey
If only this video was posted back in the early 2000...life would have been a bit simplier.
Rinesh Andrews
Thanks for the tutorial !
IThinkWithMy Dick
Soooo... how many of you have tried how many of these hacks in real life? Just curious
Wong Bali
I wanna marry girl in this video 😃
Related Videos